HCVCBYPEN=DISABLED, FBIASCEN=DISABLED, DCDCBIASEN=DISABLED, CPACEN=DISABLED, CPFPDEN=DISABLED, VBMLPEN=DISABLED, RTCCEN=DISABLED, HCVCFOEN=DISABLED, CPBEN=DISABLED, DCDCSTDBYEN=DISABLED, BIASSEN=DISABLED, CMPBLPEN=DISABLED, HCVCBMD=HIGH, CPOLPEN=DISABLED, BIASEN=DISABLED, RBGSEN=DISABLED, CPCS=VBAT, LCDEN=DISABLED, MCDEN=DISABLED, HCVLPMEN=DISABLED, HCVCHMD=HIGH
Configuration
| LCDEN | Module Enable. 0 (DISABLED): Disable the LCD module. 1 (ENABLED): Enable the LCD module. |
| CPFPDEN | Charge Pump Full Power Drive Mode Enable. 0 (DISABLED): Disable the LCD charge pump’s full power drive mode. The charge pump draws less power but operates with reduced output current capabilities. 1 (ENABLED): Enable the LCD charge pump’s full output drive mode. The charge pump operates at full power. |
| MCDEN | LCD Missing Clock Detector Enable. 0 (DISABLED): Disable the dedicated LCD missing clock detector. 1 (ENABLED): Enable the dedicated LCD missing clock detector. |
| RTCCEN | RTC Clock Request Enable. 0 (DISABLED): The LCD module does not require the RTC clock. 1 (ENABLED): The LCD module requires an active and valid RTC clock (RTC0TCLK). |
| BIASEN | Bias Enable. 0 (DISABLED): Disable the LCD bias current. 1 (ENABLED): Enable the LCD bias current. |
| DCDCBIASEN | DCDC Bias Output Enable. 0 (DISABLED): Disable the secondary bias current output. 1 (ENABLED): Enable the secondary bias current output. |
| DCDCSTDBYEN | DCDC Bias Standby Enable. 0 (DISABLED): The DCDC bias is enabled in Power Mode 8. 1 (ENABLED): The DCDC bias is disabled in Power Mode 8. |
| CPBEN | Charge Pump Bypass Enable. 0 (DISABLED): The LCD charge pump generates the VLCD voltage. 1 (ENABLED): Bypass the LCD charge pump and connect VLCD directly to VBAT. |
| HCVLPMEN | High-Contrast-Voltage Low-Power Mode Enable. 0 (DISABLED): Disable the high-contrast-voltage low-power mode. 1 (ENABLED): Enable the high-contrast-voltage low-power mode. This mode reduces power consumption when VLCD is higher than VBAT. |
| VBMLPEN | VBAT Monitor Low Power Enable. 0 (DISABLED): Disable the LCD VBAT Monitor low power mode. 1 (ENABLED): Enable the LCD VBAT Monitor low power mode. |
| CPOLPEN | Charge-Pump Oscillator Low-Power Enable. 0 (DISABLED): Disable the charge-pump oscillator low-power mode. 1 (ENABLED): Enable the charge-pump oscillator low-power mode. |
| CMPBLPEN | Comparator Buffer Low-Power Enable. 0 (DISABLED): Disable the comparator buffer low-power mode. 1 (ENABLED): Enable the comparator buffer low-power mode. |
| BIASSEN | Bias Switching Enable. 0 (DISABLED): Disable bias switching. 1 (ENABLED): Enable bias switching. |
| RBGSEN | Reference Band Gap Switching Enable. 0 (DISABLED): Disable reference band gap switching mode. 1 (ENABLED): Enable reference band gap switching mode. |
| CPACEN | Charge-Pump Auto-Contrast Enable. 0 (DISABLED): VLCD continues to track VBAT when VBAT drops below the programmed VLCD value. 1 (ENABLED): The module automatically enables the charge pump and maintains the VLCD voltage when VBAT drops below the programmed VBAT monitor level. |
| FBIASCEN | Force Bias Continuous Mode Enable. 0 (DISABLED): The bias operates as configured. 1 (ENABLED): Force the bias to operate in continuous mode. The bias will cleanly transition from its configuration settings to continuous mode. |
| HCVCBYPEN | High-Contrast-Voltage Comparator Bypass Enable. 0 (DISABLED): Hardware enables the high-contrast-voltage comparator as needed. 1 (ENABLED): High-contrast-voltage comparator in bypass mode. |
| HCVCFOEN | High-Contrast-Voltage Comparator Force On Enable. 0 (DISABLED): Hardware enables the high-contrast-voltage comparator as needed. 1 (ENABLED): High-contrast-voltage comparator force on enabled. |
| HCVCHMD | High-Contrast-Voltage Comparator Hysteresis. 0 (HIGH): Set the high-contrast-voltage comparator to high-hysteresis mode. This is the recommended setting. 1 (LOW): Set the high-contrast-voltage comparator to low-hysteresis mode. |
| HCVCBMD | High-Contrast-Voltage Comparator Bias. 0 (HIGH): Set the high-contrast-voltage comparator to high bias mode. 1 (LOW): Set the high-contrast-voltage comparator to low-bias mode. This is the recommended setting. |
| CPCS | High-Contrast-Voltage Comparator Status. 0 (VBAT): VBAT is greater than VLCD. 1 (VLCD): VLCD is greater than VBAT. |